Specturum Textured

SUPERFINE

SURFACE AND APPLICATION REQUIREMENT :

New smooth, regular and non - absorbent plasters, surfaces without undulations do not need any special preparation. Such surfaces shall need a two coat application by brush.

During application the surface should be well protected from strong winds, hot sun and cold weather. Application should be carried out at a temperature over 5o c. The product is rain proof after eight hours and touch dry after one hour at a temperature of 20o c. The application equipment used should be immediately washed with water.

GET A QUOTE

A. Surface Required Plain, cement sand / stone dust, plaster, gypsum, plywood surfaces etc.

B. Application By Wool roller & Sponge roller

C. Film Thickness 300 to 350 microns

D. Consumption Rate 1.0 Kg. Per Sq. Mtr. (approx.)

E. Average Shade Life Upto 10 Years – except blue & green families which comparatively fade faster .

F. Adhesion Virtually Permanent

G. Textures Mild Stipple (Orange Peel) Finish.

DETAILS FOR ADOPTION AS TENDER ITEM :

Providing and applying acrylic aggregate textured wall coating in Spectrum pigmented Superfine finish in shade No. * maintaining material consumption rate of average 1.0 Kg. per m 2 and 300 to 350 microns thickness on new walls in the exterior of the building. Undulations, broken edges, minor imperfections / irregularities should be rectified by using a paste made of Spectrum Rectochem Surface Improver mixed with ordinary portland cement in the ratio of 1:1. Old, flaking, plaster of paris, gypsum and highly absorbent surfaces and those already finished with lime or distemper should be brushed down and then treated with a coat of Spectrum Prime Coat diluted with water in the ratio 1:1 and applied by a brush.